To identify the different
types of surface finishes on timber we use the following descriptions.
Sawn Timber, Rougher Header & Dressed Timber.
All Timber is available in the following
lengths:
.3, .6, .9, 1.2, 1.5, 1.8, 2.1, 2.4, 2.7, 3.0, 3.3, 3.6, 3.9,4.2,
4.5, 4.8, 5.1, 5.4, 5.7, 6.0 meters long.
Note: all timber lengths are subject to availability. Please contact
us to check if your required lengths are of crucial importance. *You
will be charged for the length that you actually receive*
Sawn Timber.
This is the “raw” finish or the finish that is obtained
from the sawing process, perhaps the most “rustic” of
all the finishes. (Can otherwise be referred to as "Rough Sawn").
Rougher
Header. (kiln dried) this is a finish that consists of several
closely spaced fine lines that are machined longitudinally in the
surface of the timber, causing it to be very well or specifically
sized for ease of use. This product minimizes splinters and is easier
to apply coatings to. It is also structurally graded to F7 and is
kiln dried to minimize shrinkage and instability. (Can otherwise be
referred to as “Laser cut” or “Laser pine”).
Dressed
Timber. (kiln dried) Always referred to as the premium in timber
finishes available. Dressed timber is also very accurately sized,
has a very smooth surface finish, allowing coatings to be very easily
applied. Dressed timber is also structurally graded to F7 and is kiln
dried to minimize shrinkage and instability. (Can otherwise be referred
to as D.A.R or dressed all round).
Timber end
sizing (otherwise referred to as the end section of the timber).
Please note that end section sizes of timber may vary from their nominal
width, thickness and from piece to piece. This is not a fault or defect
and is quite normal. For example: A sawn piece of timber with a nominated
end section size of 100x50mm may actually be 104 x 52 mm.
Dressed and Rougher header timber offer you greater accuracy in sizing
to within + or – 3mm of the nominated size. For example: 90x45mm
may actually be 88 x 42mm.
If you require further assistance with
the correct choice of product for your project, our sales team will
be more than happy to help.
